Construction Site Signs on Long Island and in NYC: What's Actually Required
The fence goes up, the crew shows up, and the first visitor is an inspector who wants to know why the project sign is the wrong size. On a construction site, signs aren't decoration. In New York City they're spelled out in the Building Code down to the color and the font, and a missing or wrong panel can mean a violation for the permit holder.
The rules come in layers: the NYC Building Code and Department of Buildings (DOB) rules inside the five boroughs, OSHA everywhere, and town or village rules out on Long Island. Here's what each one asks for.
What counts as construction site signage
Project information panels on construction fences (NYC)
Parapet panels on sidewalk sheds (NYC)
Posted permits that are visible from the street
Safety signs such as Danger, Caution, Hard Hat Area and No Unauthorized Entry (OSHA)
Temporary business signs for storefronts hidden behind a shed or fence
NYC: the fence project information panel
When a site in the five boroughs is enclosed by a construction fence, Building Code Section 3301.9.1 requires a project information panel for as long as the fence stays up. The specs are tight:
Size: 6 ft wide by 4 ft high. Sites with less than 60 ft of street frontage use a 55 x 36.5 in panel. Demolition sites use a 2 ft 4 in wide by 4 ft high panel.
Colors: white lettering on a blue background matching Pantone 296 (CMYK 100, 88, 38, 35).
Type: Calibri or a similar sans serif, with capital letters at least 1 inch high.
Material: durable, weatherproof and flame retardant, such as vinyl, plastic or aluminum, meeting NFPA 701 or listed under UL 214.
Placement: on every side of the fence that faces a public street, with the bottom edge 4 ft above the ground. Long frontages (over 150 ft) need more than one.
The panel must show a rendering or elevation of the building (not needed for demolition), a "Work in Progress" title line with the type of project, the expected completion date, the owner's and general contractor's names and phone numbers, a website or phone number for project information, a bilingual English and Spanish line about reporting unsafe conditions to 311, and a copy of the main permit. When any of that changes, the panel has to be updated.
Sites with one-, two- or three-family homes can post a simpler sign under Section 3301.9.3 instead.
NYC: the sidewalk shed parapet panel
Sidewalk sheds get their own panel on the parapet (Section 3301.9.2). DOB's signage guide calls for a 3 ft by 6 ft panel in the same blue, this time as lettering on a white background. It lists the site address, the contractor responsible for the site (a logo is allowed) and a line directing people to nyc.gov/buildings for more information.
What you can't hang
The city doesn't allow advertising or business messages on sheds, fences or scaffolds unless a law requires the sign (Section 3307.4.6). There are two exceptions worth knowing:
Temporary business signs. If a shed or fence hides a store's existing sign, the store can mount a temporary sign on the structure in front of its storefront, up to 4 ft high (Section 3301.10). Signs up for more than 30 days need a permit.
Artwork. DOB rules allow artwork printed on sheds and fences, stretched over the structure or mounted on panels, under 1 RCNY 3307-01.
OSHA: safety signs on every site
Federal OSHA rules for construction (29 CFR 1926.200) apply in the city and on Long Island alike. Danger signs (red, black and white) mark immediate hazards, and Caution signs (yellow and black) warn of possible ones. Hard hat, eye protection and no-entry signs are standard at gates and work zones. These go inside the site or at the entrances, not on the public face of an NYC fence.
The Long Island layer
Nassau and Suffolk don't have one countywide sign standard for job sites. Each town and incorporated village issues its own building permits and sets its own posting rules. In most places the permit card must be displayed where an inspector can see it from the street, and some towns ask for the contractor's name and license number on site. Before you print, check with the building department that issued the permit.
How we handle construction site signage
IDR has printed for Long Island and New York City contractors since 1982. We can:
Print fence project information panels and sidewalk shed panels at the size, colors and layout you give us
Print on rigid aluminum composite (J-Bond) or weatherproof vinyl, from the materials in our catalog
Print fence banners, mesh windscreens and artwork panels
Print OSHA Danger, Caution and PPE signs, plus permit sign holders
Turn around rush jobs for bid days and inspections
Send us your rendering, permit and contact information and we'll lay out the panel. Orders are picked up at our Farmingdale shop, and shipping is available on request.
Need a construction site sign? Upload your files at idrepro.com, call 631-753-3000 or stop by 200 Broadhollow Road, Suite One, Farmingdale.
This post is general information, not legal advice. Sign rules change. The permit holder is responsible for making sure signs and materials meet the requirements; confirm them with the NYC Department of Buildings or your town building department before you order.

Comments